How-tos

How To Fix DOSS SoundBox Pro Not Turning On Problem


The DOSS SoundBox Pro not turning on issue can be caused by different factors. It could be due to a software glitch, a drained battery, or even a faulty speaker circuit. To fix this you will need to perform a series of troubleshooting steps on the device.

The DOSS SoundBox Pro is a portable Bluetooth speaker that can deliver a loud sound volume and even has LED lights that flash with your music. You will be able to carry this with you on your outdoor activities without worrying about it getting wet due to its rugged design. Some of its features include stereo pairing, active bass, and a 20 hour battery life just to name a few.

Technical specifications of the DOSS Soundbox Pro:

  • Sound Driver: 2 x 10W High-Performance Drivers
  • Waterproof: IPX5
  • Bluetooth Version: Bluetooth 4.2 + EDR
  • Feature: Stereo Paring & Active Bass & Light Show
  • Playtime (50% Volume): 20 Hours
  • Size: 7.7 x 2.9 x 3 inches
  • Weight: 1.4 pounds

What to do when your DOSS SoundBox Pro does not turn on

One issue that you might encounter with your SoundBox Pro Bluetooth speaker is when you can’t seem to turn it on. This can be an annoying issue especially if you need to use it. Here are the troubleshooting steps you need to do to fix the problem.

Solution 1: Perform a factory reset on DOSS SoundBox Pro

The first troubleshooting step you have to do is a factory reset or hard reset. This will erase the data saved on this speaker and bring it back to its default settings. This is usually done whenever you are experiencing problems with the device.

Time needed: 2 minutes.

Reset the speaker

  1. Open the rubber cover at the back of the speaker.

    This will reveal the different ports available.Fix DOSS SoundBox Pro Not Turning On Problem

  2. Use a needle to poke the reset button.

    This will reset the speaker to its default settings.What to do when your DOSS SoundBox Pro  does not turn on

After performing these steps try checking if you can turn on the speaker.

Solution 2: Charge the speaker to fix not turning on issue

If the speaker battery does not have any charge then it won’t turn on. To determine if the problem is caused by a drained battery just connect the speaker to a wall charger then leave it charging for 4 hours. Once the speaker is fully charged try to check if you are able to turn it on.

Solution 3: Faulty battery

Sometimes the problem can already be caused by a defective speaker battery. Replacing the battery will fix this however it is recommended that you have this done at a service center. One factor that can cause the battery to fail is if it has been water damaged.

Solution 4: Faulty circuit board

Another possible factor that can cause this problem is a damaged speaker circuit. Again, the internal parts of the speaker will get damaged if they come in contact with water. The best way to proceed in this case is to have the speaker repaired at a service center.

Having the DOSS SoundBox Pro not turning on issue can be a frustrating experience. Hopefully, this solution will help you fix the problem.

Visit our TheDroidGuy Youtube Channel for more troubleshooting videos.

Also Read:



READ SOURCE

This website uses cookies. By continuing to use this site, you accept our use of cookies.